How to Fix a Leaky Faucet in 5 Easy Steps

A leaky faucet is a common plumbing problem that many homeowners face. Not only is the constant dripping sound annoying, but it can also lead to wasted water and higher bills. Fortunately, fixing a leaky faucet is a relatively simple task that you can do on your own with just a few tools. In this blog post, we'll go over the steps you need to take to fix a leaky faucet.

Step 1: Turn off the water supply

Before you start working on your faucet, turn off the water supply to avoid any accidents. You can usually find the shut-off valve under the sink.

Step 2: Remove the handle

Next, you'll need to remove the handle of your faucet. This can usually be done by unscrewing a small screw located on the side or bottom of the handle. Once the screw is removed, you should be able to pull the handle off.

Step 3: Remove the cartridge

After removing the handle, you'll need to remove the cartridge. This is the part of the faucet that controls the flow of water. To remove the cartridge, you may need to use pliers or a wrench. Be careful not to damage the cartridge when removing it.

Step 4: Replace the O-rings

The most common cause of a leaky faucet is worn out O-rings. These are small rubber rings that create a seal between the cartridge and the faucet body. To replace the O-rings, simply remove the old ones and replace them with new ones.

Step 5: Reassemble the faucet

Once you've replaced the O-rings, reassemble the faucet by putting the cartridge back in place and screwing the handle back on. Turn on the water supply and test your faucet to make sure it's no longer leaking.

Rooter Man Sonoma County

By following these five easy steps, you can fix a leaky faucet on your own without having to call a plumber. However, if you're not comfortable doing this on your own or if you have other plumbing problems, don't hesitate to call Rooter Man Sonoma County. Our experienced plumbers are always here to help.